Description
Subaru TPMS warning light on? This Renectiv 433MHz pre-programmed 4-Pack sensor set replaces the failed factory unit — a direct OE-grade fit with no dealer visit needed. OE replacement numbers listed below.
Subaru TPMS Sensor 433MHz Fitment & Compatibility
Browse all our TPMS sensors for Subaru and other makes.
TPMS Sensor, 433Mhz Subaru Tire Pressure Monitoring System Sensor Set of 4
Key Features
- 【Pre-programmed TPMS Sensor】The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,just activate them with TPMS scan tool.
- The specific operation is as follows Step:1.Set the vehicle gear to P gear and pull up the handbrake,Properly install tire pressure sensors 2.Ensure all tires are inflated to the pressure listed on the tire placard.(located in the door jam of your vehicle).Let it stand for 5 minutes3.Starting with LF tire,use the TPMS tool to trigger each sensor in the following order:LF,RF,RR,LR&full size spare(if equipped)4.Turn ignition to ON position5.Connect TPMS tool to OBD II port then write sensor IDs6.Switch off,then switch on the ignition.7.Test drive abve 19 mph(30km/h) for at least 10 minutes,make sure tire pressure monitor system work fine(TPMS light off)
- 【High QUALITY】The battery can be used normally for more than 5 years, the pressure reading can reach 110 PSI or higher, and the temperature can reach -40~125℃,same as OE quality
- 【APPLICATION】Compatible for Compatible for Subaru Ascent/ Crosstrek/ Forester/ Evoltis/ Impreza/ Legacy/ Outback/ WRX/ XV.
- 【REPLACE PART NUMBER】28103FL000, 28103FL00A
- 【Note】Please double check the compatibility and frenquency before you buy to avoid unnecessary costs.Please Use Amazon Part Finder( Amazon Garage) ,our compatiblity picture Verify the Fitment, or can feel free to contact us to check
- 【GOOD SERVICE】One year warranty.We all 100% tested before leaves our factory.Any problem for tpms sensor,Please do not hesitate to contact us!
Product Details
TPMS Sensor.
Pre-programmed TPMS Sensor
The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,just activate them with TPMS scan tool.
High QUALITY
The battery can be used normally for more than 5 years, the pressure reading can reach 110 PSI or higher, and the temperature can reach -40~125℃,same as OE quality
APPLICATION
Compatible for Compatible for Subaru Ascent/ Crosstrek/ Forester/ Evoltis/ Impreza/ Legacy/ Outback/ WRX/ XV.
REPLACE PART NUMBER
28103FL000, 28103FL00A
Note
Please double check the compatibility and frenquency before you buy to avoid unnecessary costs.Please Use Amazon Part Finder( Amazon Garage) ,our compatiblity picture Verify the Fitment, or can feel free to contact us to check
GOOD SERVICE
One year warranty.We all 100% tested before leaves our factory.Any problem for tpms sensor,Please do not hesitate to contact us!
Professional Test
All tire pressure sensors need to undergo strict quality control before leaving the factory, including durability tests, high and low temperature tests, environmental tests, and strength tests.
Specifications
| Brand | Renectiv |
| Model / Part Number | B0GXYMWRNP |
| Frequency | 433MHz |
| Quantity | Per variant |
| Measurement Accuracy | ±0.05 Bar |
| Response Time | 1 second |
| Upper Temperature Rating | 125 °C |
| Material | Metal, Plastic |
| Mounting Type | Clamp-In / Snap-In (per variant) |
| Battery | Internal, long-life lithium (non-replaceable) |
Support & Returns
Questions about product installation or use? Contact us at info@renectiv.com — we reply within one business day. Returns accepted within 30 days.
Reviews
There are no reviews yet.